The New MusketeerV4 is super lightweight with a short handle for drawing complex designs. The lightweight allows more wiggle and less pressure so never overflows again!
 
Pro
Drawing Lightweight 195g, 0.7mm for Drawing patterns and complex multiple leaves.
Bold- Embossed Swan Logo compare to V3
Short Handle - for Small Hands or females
This Short Handle is the same as our Ironman's handle which is designed to support dragging with semi-foam for all drawing patterns at ease. Suit anyone who prefers a small handle that helps to get closer to Jug's body for better control.
Milk Frothing measuring helps you get the right froth and minimise wastage. 
Good for any basic pushing patterns in a small cup such as 10-8 oz size
 
Con:
There would be some dents/factory marks inside or outside the jug, Mostly at the bottom (pls see photo) and in no way toxic or affecting the pours. These dents are not defective or damaged or from transit. Due to the material being at 0.7mm so it will be easy to get factory marks or dents than 0.8mm thicknesses
The Wire markings on the inside of the milk jug are a normal occurrence during the electroplating process. The wire is used to hold the jug in place during electroplating, so the mark will appear after the process is complete. This marking does not signify any defect or poor production.
Rainbow-plated jugs come in a spectrum of colors, so expect to see a variety of colors on each jug. Occasionally, small soft spots may appear but they are not considered defects. 
After the first use, fingerprints will easily show on the Matt Coating. This is not a color defect, and spraying the surface with Glass spray and wiping with a microfiber cloth will remove the marks.
 
What are the differences between each Version of The Musketeer
V1 at 240g Basic unisex handle
V2 at 240g Basic, Big handle
V3 at 200g Drawing, Unisex handle
V4 at 200g Drawing, Short Handle
 
Jibbi's note
When your pour is crooked, you may assume that the spout or handle of the jug is misaligned. However, the jug's spout and handle aren't causing the uneven pour as they're produced within acceptable tolerance limits. The sharply pointed spout is intentionally shaped like an eagle's beak and is designed to create clean, defined lines, and bold contrasts. 
Compared to pitchers with large spouts, this design requires a steady hand and precise movements due to its pointed shape, leaving little room for error. While challenging at first, practice will undoubtedly enhance your pouring skills. I would advise against blaming the tool before examining other factors.
During a tulip, beginners often tilt or hold the pitcher unevenly, causing crooked pours. To prevent this, keep the cup level and align the spout center, ensuring your arm stays parallel to the cup. Slowly pour onto a dry canvas in the center keep the pitcher close to the surface. Avoid lifting it too quickly or too high as this can cause it to lose its position, resulting lopsided pour.
The pitcher can assist you in mastering a highly useful skill once you become familiar with it through practice. However, if you have difficulty holding cups and pitchers correctly and prefer a simpler pour, we suggest considering our rounded spout model. 
 
Please read carefully as we do not offer refunds or exchanges under the below conditions.
We check all the jugs before posting them to you. All stainless steel production will have a slight tolerance and variance occur from jug to jug or in any parts of the jug due to their natural tenacity, so you will find small but acceptable variations between spouts left vs right/ handle and body.
There is a welding mark at the handle inside the jug from Laser welding to make your Handle last longer. This mark is not a defect and does not rust.
We acceptable variations of handle alignment with a tolerance range of 1-2mm in Production by monitoring and testing to ensure the same is within the acceptable level of tolerance. This in no way affects the pouring or the pouring technique.
In the process unfortunately at times of Polishing or Coating, the metal might come into contact with another object that slightly scratches the metal outer and internal surface of the jug.
Whilst all care is taken in looking at each jug, there is no guarantee that every stainless steel product will have a surface with no scratches. (See our reference photo with minor scratches).
In agreeing to purchase this Color Coating you accept that all mentioned above are not defects but rather part of the production process. There would be some scratches and factory marks on the exterior and interior. Anything plated will eventually tarnish with time and wear.
 
Read before you buy
Please review our policies on QC, alignment, colour coating, return and refund, and No Change of Mind. Agree to all policies before ordering.
Check item quality before first use. If you have any issues, please report us within 3 days of receiving it, along with the order number and proof of Unboxing. 
No refunds allowed for a change of mind or incorrect selections. 
Choose colors based on names, not photos. Some items may lack photos or accurate links. 
Color coating may peel, fade, or discolour over time. 
To replace major coating issues or defects unmentioned before use, contact us within 3 days.
Signs of used jugs void Return policies.